Beeswax 4 sheets
100% natural honeycomb beeswax
Price
9,5 €
In short: Four sheets of honeycomb beeswax, 100% natural, with no paraffin, fragrance or additives: all you need to remake your didgeridoo's mouthpiece in a few minutes. One sheet is enough for 2 or 3 mouthpieces.
The wax: Each sheet measures 260 x 120 mm and weighs about 32 g. Thin and embossed, it tears easily. Its colour is that of golden honey. Another advantage of beeswax: it keeps for a very long time, with no special packaging.
My method: This is the method I recommend, because it gives the best adhesion of the wax to the wood. What's more, if your instrument has micro-cracks, it seals them.
Remaking a mouthpiece, step by step:
- Put 3 sheets of wax in a plastic container and place it in a bain-marie, in a saucepan of water.
- Heat gently. The wax melts from 60 °C and becomes liquid. Do not bring it to the boil: it must not be too hot to handle.
- Meanwhile, clean the wood of the mouthpiece.
- Put the saucepan on the floor, on a newspaper, and dip the instrument's mouthpiece for a few seconds.
- When a thin film of wax has formed, take the didgeridoo out and turn it to spread the wax evenly.
- Let the wax cool and harden. Meanwhile, prepare a roll of wax: roll a piece of honeycomb sheet in your hands, warming it with a hairdryer.
- Place the roll on the top of the mouthpiece and shape it. If the wax in the container starts to set and turns yellow again, heat it up again.
- Dip the mouthpiece again and take it out straight away: this bonds the roll to the wax already applied.
- Gradually give the mouthpiece the shape you want, while the wax is still warm enough to be moulded.
- Leave everything to harden for 1 hour.
- As soon as the mouthpiece is dirty or damaged, start again!